Seersucker Fabric Supplier introduces the weaving method. Two different warp beams, ground warp and bubbling warp, are used in weaving. The foaming yarn has a thicker yarn count and the warp let-off speed is about 30% faster than that of the ground warp. Therefore, the cloth body forms concave-convex bubbles when weaving into a grey fabric. After loose finishing processing, it becomes a woven seersucker. The seersucker produced by this method is generally made of yarn-dyed color strips, including cotton, purified fiber or chemical fiber blended.

After the cotton cloth is processed by scouring, bleaching, dyeing or printing, it is printed with sodium hydroxide paste, and then washed and dried in a loose manner. The part of the cotton fiber on the fabric that is affected by sodium hydroxide shrinks, and the unprinted part does not shrink, and the cloth body forms bumpy bubbles; it can also be printed with a water-repellent paste, and then dipped in sodium hydroxide solution, stacked, Loose washing and drying. The part where the water repellent paste is printed on the fabric can prevent the action of sodium hydroxide, while the unprinted part of the cotton fiber is contracted by the action of sodium hydroxide, so that the body of the cloth forms a bumpy bubble. The bubbles produced in this way can be aligned with the printed patterns. If paint or ice dye is added to the water repellent paste, it can also make the fabric produce colored bubbles. After the fabric is printed with a water-repellent paste and immersed in sodium hydroxide solution, it is immediately embossed, stacked, and loosely washed and dried, which can make the fabric produce regular bubbles that are neatly arranged.

Through the above introduction, Printed Seersucker Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.haiwei-hometextile.com/